Services

guns

With over 18 years of gun experience, K2 Precision specializes in a wide arrangement of gunsmithing services.

(See our estimated price guide of services below. All jobs are subject to review before giving a detailed quote. If you have any questions, please contact us.)
SERVICE CHARGES
Per Man Hour $35.00
Per Man & Machine Hour $60.00
MINIMUM CHARGE PER GUN  $35.00
CLEAN & OIL CUSTOMER GUN
Consisting of completely stripping gun, cleaning all parts, checking for wear, making suggestions to a customer of services needed to put in A-1 condition 75.00
METAL FINISHING
OXYNATE 7™ REBLUING
Abrasive / bead blast / wire wheel (matte) finish $120
Deluxe Finish:
Same as above followed with #240 and #400 grit polish with all screw holes and corners protected and square
Handgun $170
Rifle/shotgun $165
Master Finish:
Same as Deluxe Finish with all polishing marks removed, no ripples, and finished with #555 polish to a mirror finish
Handgun $200
Rifle/shotgun $205
IM™, BELGIAN BLUING
Handgun $190
Rifle/shotgun $200
SLOW RUST BLUING / BROWING $275
OXYNATE 84™ BLUING OF STAINLESS STEEL or cast Win. 94’s and others
Add to price of appropriate normal steel bluing cost $70
NitreBlue™ BLUING (Small parts / accessories)
Not including polishing time $115
BAKING LACQUER FINISH/TEFLON-MOLY FINISH $135
BEAD, SANDBLAST OR WIRE BRUSH STAINLESS STEEL $100
ELECTROLESS NICKEL PLATING
Handguns or small parts only
High polish $200
Satin finish $170
Rifles/shotguns
High polish $205
Satin finish $165
STRIPPING NICKEL
Removing old nickel finish prior to bluing
or replating $125
PARKERIZING $120
COLOR CASE HARDENING $340
METAL CHECKERING Hourly Rate
ENGINE-TURNING BOLT Hourly Rate
ENGINE-TURNING SMALL PARTS Hourly Rate
DRAW-FILING (per man hour) Hourly Rate
SIGHT WORK
SIGHT IN CUSTOMER GUN – Does not include
cost of ammo, targets, etc. $62.50
BORE SIGHTING CUSTOMER GUN $25
PATTERN SHOTGUN – Does not include cost of
ammo, targets, etc. $62.50
DRILL AND TAP BARREL OR RECEIVER FOR SIGHTS
Per hole $32.50
CUT DOVETAIL IN BARREL $75
INSTALL FRONT SIGHT RAMP
Sweat-on type $62.50
SIGHT WORK (Continued)
Screw-on type (including drill & tap) $ 50
Band type Hourly Rate
INSTALL INSERT IN PISTOL SIGHT $40
INSTALL FRONT OR MID-RIB BEAD
ON SHOTGUN (Plus cost of sight) $40
Plug hole and re-drill for bead $50
INSTALL RECEIVER SIGHTS
Gun drilled and tapped $35
SCOPE MOUNTING
Gun drilled and tapped $45
GENERAL BARREL, ACTION & RIFLE WORK
CHECK HEADSPACE $52.50
MAKE CHAMBER CAST $72.50
REMOVE STUCK FIRED CASE FROM CHAMBER Hourly Rate
REMOVE LIVE ROUND FROM CHAMBER $100+
REMOVE OBSTRUCTION FROM BORE Hourly Rate
REMOVE FOULING FROM BARREL Hourly Rate + Materials
LAP BARREL $90
INSTALL LINER IN BARREL – Not including
cost of liner or bluing $150
CUT AND CROWN BARREL
Rifles and Shotguns / Handguns $65
CHAMBER AND FIT BARREL TO ACTION
Does not include the cost of the barrel,
action, polishing, bluing $200
INSTALL PRE-THREADED AND CHAMBERED
BARREL – Not including Polishing & Bluing $115
LAP IN BOLT LUGS – Not including setting back barrel
or fitting new barrel $60
WELDING ON NEW BOLT HANDLE $75
FORGING BOLT HANDLE $90
MAKE AND INSTALL SPRING Hourly Rate
SAFETIES, INSTALLING,
Dakota, Gentry, Mod 70 Type Safety w/shroud (+ finishing) $115
Mark II/Beuhler type $60
Chapman Swing Safety Lever $95
TRIGGERS (INSTALLATION OR ADJUSTMENT)
Shilen, Timney, Dayton-Traister, Moyer type $65
Double-Set $175
Single Set $95
INSTALL MUZZLE BRAKE $100
RECONTOUR FRONT OR REAR RECEIVER RING $95
INSTALL BARREL BAND SWIVEL Hourly Rate
SHOTGUN WORK
LONG FORCING CONE
Non-plated bores, per barrel $60
Plated bores, per barrel $75
RESOLDER RIB – Not including bluing Hourly Rate
RESOLDER FOREND LUG
Not including bluing Hourly Rate
RAISING DENT IN BARREL
Not including bluing $100
STRAIGHTEN / ADJUST BARREL $70
POLISH CHAMBER/BORE $55
BACK-BORING – Per Barrel, non-plated bores Hourly Rate
OPEN / MODIFY CHOKE
Per barrel or tube, non-plated bores $55
INSTALL SCREW-IN CHOKE (plus tubes)
Win-Choke®, Colonial, etc. (non-plated bore) $115
PORT BARREL – PER BARREL $110
REFITTING HINGE PIN LUG $175
MUZZLE LOADER WORK
PULL BALL Hourly Rate
REMOVE BROKEN RAMROD FROM BARREL $62.50
HANDGUN WORK
CHAMFER REVOLVER BARREL $35
CHAMFER REVOLVER CYLINDER $42.50
REVOLVER ACTION JOB – Clean, smooth action,
not including replacement of parts $90
REBARREL REVOLVER – Remove old barrel, $75
replace with new factory barrel, labor only
HANDGUN WORK (Continued) Price Range
STRAIGHTEN CRANE ON REVOLVER $37.50
INSTALL CRANE LOCK $40
REMOVE/MODIFY REVOLVER HAMMER SPUR $40
CONVERT REVOLVER FROM SQUARE
BUTT TO ROUND BUTT  $77.50
SEMI-AUTO PISTOL ACTION JOB – Clean,
smooth action, not including any parts $100
TIGHTEN SLIDE OF 1911 AUTO $80
FIT BARREL TO 1911 AUTO, Not including barrel
Non-Ramped Barrel 45.00 – 115.00
Ramped Barrel 80.00 – 175.00
FIT AND INSTALL BARREL BUSHING ON 1911 AUTO
Does not include cost of bushing $35
BEVEL MAGAZINE WELL OF 1911 AUTO $42.50
CHECKER FRONT OF FRAME ON 1911 AUTO $175
STIPPLE FRAME $65
OPEN AND MODIFY EJECTION PORT OF
1911 AUTO SLIDE $45
THROAT, POLISH BARREL AND FEED RAMP OF
1911 AUTO $37.50
FIT NEW TRIGGER TO 1911, Does not include cost of trigger 20.00 45.00
FIT CUSTOM HAMMER TO 1911,
Does not include cost of hammer $67.50
CUT SLIDE FOR BO MAR, w/o sight
Plain Cut $135
w/Side Shields $160
CUT SLIDE FOR DOVETAIL FRONT SIGHT, w/o sight $72.50
CUT SLIDE FOR NOVAK REAR, w/o sight $135
INSTALL STAKE-ON FRONT, w/o sight $45
FLATTEN SLIDE TOP & SERRATE, w/o sight $115
DEHORN & BREAK EDGES FOR CARRY
(Not including refinishing) $62.50
FULL MELT DOWN BEVELING $110
MODIFY 1911 AUTO FRAME FOR BEAVERTAIL SAFETY
Includes fitting of safety, does NOT include cost of
safety or refinishing  $100
INSTALL AUTO PISTOL COMPENSATOR 90.00 – 350.00
STOCK WORK
WOOD FINISHING (Does not include any shaping)
Hunter Finish
Unfilled oil or lacquer finish on average stock $125
Same finish but on a complicated stock $140
Gunsmith Finish
Filled, rubbed oil finish on average stock $160
Same finish but on a complicated stock $200
Spray Finish
Lacquer or polyurethane $125
RECUTTING CHECKERING – Other than by the
hour, per panel
Simple pattern $85
Complicated pattern $125
GLASS BEDDING BARREL & ACTION
Hunting Rifle $110
Match Rifles, M-1 Garand, M1A, etc. $95.00- 225.00
Pillar Bed $95.00 – 165.00
INSTALL RECOIL PAD – Labor only $60
INSTALL ADJUSTABLE BUTT PLATE – Labor only $105
INSTALL SLING SWIVELS – Std and Q/D $45
INSTALL STOCK CROSS BOLT (Not including refinish) $60
INSTALL RECOIL REDUCER
Simple installation in butt stock $35
Hydraulic butt plate-style (Gra-Coil or Counter Coil®) $100
Drill Stock & Install Recoil Reducer 72.50
INLETTING AND FINISHING OF SEMI-FINISHED STOCK
Not including checkering, recoil pad,
special butt plate, grip cap or other
attachments $200.00 – 650.00
FIT, BED AND FINISH FIBERGLASS STOCK BLANK $175.00 – 350.00
PREFINISHED SYNTHETIC STOCK
Fit and install barreled action $92.50

K2 Precision Gunsmithing CALL OR EMAIL FOR AN APPOINTMENT:

Phone: 812-590-2677 (COPS)     Email: k2precision@gmail.com

Have fun!